charlton

This is the best I can do for you right now.... It will look much better once cleaned up, most of those lighter patches will go on the silencer [ATTACH=CONFIG]217548[/ATTACH][ATTACH=CONFIG]217549[/ATTACH]

I have the below for £350 with the (unused) bung if he's interested? It has the usual flat spots on the pipe and first can from bumps and a slight ding in the main can, none of which show when on the car. Wanted to give it a clean before advertising it but I haven't got the right gear to do so at the moment [ATTACH=CONFIG]217547[/ATTACH]

I've been meaning to clean mine up and put it up for sale, as I haven't got the right gear to clean it I haven't advertised it yet - I'd like £300 if you're interested? The bracket broke so it will need welding together, there is a a couple of the usual flat spots on the pipe from bumps and there are a couple of marks on the can from when the bracket broke and the exhaust dropped. None of which are visible when the exhaust is on the car [ATTACH=CONFIG]217545[/ATTACH] [ATTACH=CONFIG]217546[/ATTACH]

Great spot!

Cheers Dunk, that's the diagram I had seen before That would be great, thank you - you have PM

Thanks for the replies guys I've seen a post like this before with a template, but you think I can find it...? I'm not sure on the wheels, they were on it when I bought it and I've not investigated properly Thanks Dunk, that's a good call, is that not just for Stop Tech calipers, or are they similar in size?

I've had a search and am obviously doing it wrong as there's a lot of threads on this and I cant narrow it down to what I need Is there an simple way of checking to see if the larger 4 pot brake calipers will fit my wheels without taking the wheels off? Is it possible to get an idea by measuring the clearance between the 2 pot calipers and wheel spokes?

Also, did you need any resistors for these to work?

They're worth a punt at that price, although, I thought that LED's weren't legal for driving light use - or am I making that up?

Wow to that price, its upsetting comparing the cost of mine for a lot lot less

My harnesses are attached to a rear strut brace, not perfect the guide but better than some other options They can be annoying for day to day use but you get used to them, I think I'd struggle with normal seats and belts now

I'm guessing a few people here know nicky as the BS police would usually be on the case for a 20 year old with £18k to splash on a 600hp Supra Most here seem to struggle with insurance on any Supra when they're under 25, have you got quotes already? If so, surely there cannot be too much difference in price between a 660hp NA-TT-Single and a 600hp TT-Single Also make sure those quotes aren't for a UK spec

Cars of this age and of that mileage that have only had a water pump or little done to them would be a cause for concern for me. Sometimes having (major) things replaced and fixed isn't a bad thing. I've swapped all my weather seals as they were not doing too good after 23 years, brake lines, turbos next and they have done under 90k miles etc Also, that manual gearbox will be very hard and expensive to repair!

LHD v RHD costs, although I do agree that's a bit steep

Great work again Andrew 1. AndrewOW, 1, UK 2. Ric, 1, UK 3. Fitz, 2, UK 4. Lawrence, 4, UK 5. Supra_ufo, 2, UK 6. ben_harmer32, 1, UK 7. JayJay1374 1,UK 8. James, 3, UK 9. Ian Ian 4, UK 10. Brassbones, 1, UK 11. Supra_4_Real, 1, UK 12. ripped_fear 2 uk 13. mwilkinson 1, UK 14. Mark C , 2 , UK 15. Matt Davies, 1, UK 16. achagor, 1, UK 17. Jim, 1, UK (Northern Ireland) 18. Knightrider1981, 1, UK 19. Brian888, 1, UK (NI) 20. C12MMO, 1, UK 21. Bignum , 1, uk. 22. Big Mark, 1, UK 23. Glanza_Mike, 1, UK 24. Luxluc, 2, International 25. mellonman, 1, UK 26. 96sz, 1, (uk) 27. JasonR24, 1, UK 28. Turbo-v8-Turbos, 1, uk 29. ShawnPreece, 4 if delivery is to be expected before xmas (presents) or 2 if after all UK 30. mplavery, 1 , uk 31. CorruptSapphire, 1, UK 32. charlton, 2, UK

Damn OCD

Let me know when the main ring is available to buy, will definitely take that too

I remember hearing a while back that the OEM skirts are discontinued, I never followed this up so I am keen to know if they are still available or where you get them from

Me, well I assume it's this issue as it only seems to move one side of the seat. What sort of cost do you think we'll be looking at?

I'll take them, let me know the shipping costs to the postcode in my PM and how you want to be paid

Received mine yesterday, they look great, thank you! Now I have to get round to pulling my lights out to fit them...

You have PM regarding turbos

Just got mine in before the cut off