DannoSupra

The ABS light stayes on sometimes in the N/A, is there a way of diagnosing the fault, flash code etc Cheers Dan

Cheers fella, i cant remember anything about having to cap that Actuator

I'll have a go at it tonight. Has anyone got a copy of the plumbing to do with vacuum vsv bypassing etc to install AVC'R. I've lost mine, i just want to double check everything is ok All i've done with the avc'r is, set it to auto setup. But i got it off all of the time maxing at 1.0Bar, but with it on, its bewteen 1.4 - 1.5 Max The wiring is ok, i made sure the right earth went on the right way on ecu, because there's 2 earths to go on one wire isnt there Cheers for all the info though guys, i might make a gasket/restrictor out of 3" pipe with a flange (making sure the gases escaping go through 3" gap only) and just slot it into the exhaust and use it as a gasket too. If that makes sence to ya'll :thumbs:

i might have one for ya bud, i'll have to have a look in the shed when i get home

its only doing it since putting the zorst on, thats why i thought it was related anyone recomend where to take it, or diy setting up cheers

is it worth me sorting the xhaust tho? Might take is somewhere to get set up properly, any recomandations?

yeah i got a Apexi AVC'R...

This was on his website: Up at five and really so keen, To see the bond of man and machine 3 hours to drive to get to the start We all have a laugh and so full of heart We know it is early, the weather is damp But we need to see cars come off the ramp Through fog and rain we push on with style We know the main man is due in a while Then comes a whistle, the marshal says time A car is now coming through forests of pine Its howl is so frightening, like a banshee on heat There is no escape, as we shuffle our feet And suddenly now its why we are here McRae over crest of course in top gear! Its been worth the wait, the weather, the toil, To see the brave Scot here on home soil But now there is silence, and its deafening too Cos you and the wee man have bid us adieu. So rest in peace Colin you and your lad You gave us your best, John be proud of your dad. The memories you left us are all just the best You shone like a star, just simply the best. Colin you"re a mate and thats what we all thought It made you our hero and that just cant be bought. Now your in heaven with your boy and at rest But you left us the true meaning of FLAT OVER CREST!. :(

anyone?

A little something to remember him by

Hmmm... tempted too Or reverse the switch, Trac off. then push to put on

Do a wiggle test... What you need to do is, if u got one, get a multimeter set to Continuity or Ohms, then test the wires between the multiplug for the Lock and where it goes to... then just wiggle the wires... becuase when you say that it started to work with the door card off, then it point towards a broken wire making contact when moving other parts... Hope this helps

Right screw the bolt in a couple of threads and just TW@ it from the back, other wise if you leave the bolt out, the wheel will come flying off and hit you in the face leaving a nasty lump.... talking from experence! with a wooden Jag wheel, Ouch

Is it due to the fact of my decat being over 3" at the flange where it connects to the down pipe? When it got made, i noticed the flange made had a bigger internal diameter than the 1st cat that came off... If i were to take it off and inspect further... What's the diameter suppose to be? Its a UK so no need for restricor ring no? Cheers

I Have!!! Spacer's 1" long between Bonnet and Hindge, then longer m10 bolts

Longter Bolts and loads of washers! It'll work! Or get someone to make you some spacers!

You wont be able to see.. clouds are low at the mo I'll take them both for a photoshoot in nice places soon, been meaning to do so, but waiting for Sam to get her's... now we got one, the weathers crap As you say, i'll go in the rain

Nice Place... there's quite a few nice passes where i live, i'll go and take some pics one day..... Next Summer

Hartside Cumbria

Because i was the one suppose to go and get it after

R.I.P a great legend

Absolutelly gutted!

Cheers dude, drop us a PM

I'm after a polished one, cheers tho!

As above please anyone Cheers