JamieP
-
Posts
38215 -
Joined
-
Days Won
31
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by JamieP
-
Is the plan to camp at the pod then drive to the karting place in the morning? very much up for camping at the pod this year, might hire a camper van.
-
Dont give us that bullsh1t, you are just scared:D
-
Never known one car to have so many problems, i think that car was jinxed from the famous broom stick mod, back in the turbofit days, Bonfire night is only a few months away mate.
-
You would have to ask Ryan about that one Ian, all i know is the fuel pressure sensor is wired to the ecu, any fuel pressure problems the ecu should look after the engine is what i have been told.
-
Fuel pressure sensor is wired to the ecu now, any drop in pressure and the ecu will go into safe mode. We have a few ideas to try now and I will report back, first off fitting a new filter inside the big in line filter under the car, also the braided fuel lines are covered in a protective plastic shield that won't be helping we think, so going to remove that, also going to change the pump setup so just the one pump is running for off boost driving, and lastly Lee is going to fit a bigger return line as the one on it now may be restricting flow when at idle.
-
Was Mark still on a auto diff then?
-
Larry at Sound Performance said they always stage the pumps, one runs 99% of the time, the other when on boost.
-
Yeah my bad, it is the 13th
-
Edit...13th August at Santapod Raceway.
-
Both rear bolts, for a shorter guy that dont need them set right back it might be possible.
-
Thats with an oem rail though, with these there is zero room, ive spent hours at it.
-
Nah i dont think you would do it mate, i have mine set far back, front bolts are easy to get in, back ones impossible, the only way i think you could do it is a long bolt fixed to the rails going right through the floor and put a nut on from under the car, not sure if anything would be in the way though.
-
They will bolt up to the seats, but then its near damn impossible to bolt the rails down in the car with the seats fixed to them, no room to get the bolts in, its easy with buckets as you bolt the rails down, then bolt the side mount to the rail, then fix the seats to the side mounts.
-
I'm not that brave!
-
Sounds good, going with the carbon bits on the front wings/skirts and a BGW?
-
Did look nice at japfest Add, one of my favourite kits, who is going to be first to go full ridox then? arches and all the carbon bits?
-
Maybe put a in next time, its hard to tell if you are joking or not otherwise;)
-
Unlikely...
-
I would be very surprised if any of the yanks would attend, big outlay for them, feel free to put up a thread over there though.
-
Ive emailed a few to see what interest i can get, anyone find a email address for smokey nagata?
-
Just spoke with JB regards this and im now on the case to see what i can get sorted, any suggestions are welcome.
-
How about trying to invite some off the big players this year? you never know, Smokey Nagata and his V12 Supra? he has been to the UK with his cars before and may be up for it, he was talking about going to the texas mile last year, Maybe the SATS cosworth Supra, i know its a drift car but a company like Cosworth could set it up for drag with ease id have thought, any others you guys can think of? Has anyone ever spoke to the mags about doing a feature on the day? im sure Redline would be up for it, they love Supra's, want me to talk to them?
-
Want these gone, offers considered.
-
You will need longer studs for any slip on spacer imo unless you are talking a couple of mm thick.
-
PCD is 114.3 and centre bore is 60.1
