cainhead

Trying to find a new alternator for 93 jspec tt auto. I have tried Toyota and they have said discontinued. Anyone know which of the eBay ones are any good. Part number I have is 27060 46120 Cheers

Hello, Does anyone know anything a bout the Black GZTT aerotop for sale on the FB page. Its down near Brighton way. Its a 93 with 86000 miles and hasn't been on the road for a while, so no MOT. Needs a bit of paint work but looks like it could be a good project. Im heading over to take a look today, just wanted to know if it was previously anyone's car on here. Sorry for no link/pictures. If your on the FB page you will spot it no problems. Cheers

That makes sense, will have a dig around the garage and see if I can find something to fit. Cheers

Strangely mine didn't have a washer on there. The flange on the bolt is the size of a washer, but like I say works okay with the standard pulley. I take a standard stainless washer would be okay to use? Cheers

Hey Lee, thanks for the reply. It's a uk spec standard tensioner if that makes any difference. Is it just a standard washer that goes on behind the pulley. I noticed the ring clip that holds in the bearing has two little tabs that seem to stick out. Is that right? Cheers

Hello, Just picked up an SRD idler pulley and got in installed. However it won't spin. Replaced original one and no issues. Does anyone know if it needs a spacer/washer of any sort? Cheers

Appreciate the education on this. The 1.0 ar sound a bout right, I'm not looking for massive power, just something that picks up through the whole power band. With a 6262/66 Whalen would you expect to see boost in terms of rpm Thanks again

Just having a look and have found one new for around £780. When looking through the options, would t4 divided mean twin scroll? Also I don't understand the .84 - 1.0 - 1.15 a/r and so on, what would I need to look for. Cheers

I might have commented on your post from Facebook. I was asking if it was a gen 2. - - - Updated - - - Thanks for your comments everyone

Hello, Bit of advice needed. Bought a T87 turbo kit second hand of Keron last year. It was a bit of an impulse buy but I feel I got a good deal. It also gave me a project and kept my mind away from the bad year I had. Anyway I knew the turbo would have loads of lag but thought I could change it down the line. I'm not in a rush to change but I keep seeing the odd precession turbo pop up for sale and it's peaked my curiosity. So what would recommendations be. I'm looking for something to get me to around 650hp that has a smooth power curve and spoils nice and early. The manifold is a twin scroll T4, and have had all supporting fuel and ecu upgrades to suppport decent power. I have seen a new 6262 up for sale and would love some opinions on that model and other recommendations. Many thanks in advance

Bump on the wipers

It's an older HKS turbo timer with loom for supra. Just removed from car and working fine. Plugs straight in, just needs to be earthed. I used the bolt under the clutch. No idea what its worth, but looking for £40ono. Cheers

Will take the water pump cover and aux pulley if thats still available. cheers

Just sent you a PM

replied

I have sale Pair of chrome Isotta wipers. Good condition but blades could do with replacing - £20 delivered Chrome TRD logo radiator cooling plate. Only a few marks where the bolts hold it on. £20 delivered - SOLD Aerocatches, No pins or keys, £5 delivered - SOLD Thanks for looking.

Just seen this. Very good! I asked initially as like you say titanium doesn't rot and it looks in good condition, but had you said it was 2 years old I would have taken it. Had you said it was 10 years old I would made you an offer and you could of decided. Still good humour, and GLWS.

What sort of age is it?

Are the heater controls available cheers

Not sure of it would be sold with the transmission but after the heat protector that go around the clutch fluid reservoir. Also if the heater controls/bonnet damper falls through im after both. cheers

Pm'd

Do you want to meet up at Clackett.

Think I asked this already but anyone meeting at Clackett lane services on way?

I'm heading down to a friends that weekend who lives a few miles away so I'll meet you guys there if that's okay. Just let me know your timings.