johnd-mkiv

I will post up costs once I have made the first cage up as Im not sure how much tube I will use to make one and the costs of powdercoating/painting. Each cage will be test fitted in my supra and not made from a jig so they will be a 100% Fit

I have spoken to the mods with regards to making a batch of roll cages up and its been confirmed. Im looking at making up the half cages simular to the Do-luck (seen in top left pic below) Looking at some pictures of it it seems to be purely a show piece, with little protection if the car was to roll. Im looking at making a bolt in half cage that will retain the rear seats made from 2" cds tube I can make them from T45 if needed, theres a 10% reduction in weight using t45 over CDS. I can have these powder coated, sprayed to any colour, or even chromed. Brackets for NOS bottles ect and additional braces. Im just looking into what people want really I have been playing about with a mock cage in my supra but dont want to carry on with it if its not what you are after. I will also look into making show cages from highly polished ally if thats what you want. This is just a mock up cage to make sure I can achieve a nice sweeping bend with the tooling I have, once im happy with it ill make one up from CDS painted and fitted to my supra with pictures

Thanks ill look into it this weekend

100% manual you can see the stop restarts along it every 4" lovey piece of work though

and ugly but each to there own

The dash board lights work its the lamp in the lining that has nothing, none of the buttons do anything on the unit as if there is no power going to it but seems odd how they are illuminated

Bit of a beast http://www.bigbikeriders.com/48cyl.htm http://uk.youtube.com/watch?v=WXGYWSIePf4

Since owning the car the heater and aircon has never worked along with the rear screen demist and the interior lights. After a 15 mile drive im starting to sweat out the heater unit has the illumination part working (green LEDs) but not one of the controlls activate, I have tried another unit that I know works and still the same. the whole dash has been messed about with so im not sure where to start. I have checked the fuses Im guessing they are just the ones in the drivers kickwell they all seem fine might pull them and double check this weekend is there any other possible causes?? are the interior lights part of the heater loom?

may be my warped sence of humour but ive been the same every time its come on

cheers I have one mate £50 also have new bearings and seals for an overhaul as I was going to fit a trd lsd into it but ended up with a 6 speed diff

Save it for a drift project mate

Chris Wilson route is the way Jon I went out in Mike B's car Bloody hell that handled well around Marham overtaking Elises On bends at stupid speeds, it just stuck like glue and handled amaising I was shocked

I have heard this "noise" too and its nothing to worry about any aftermarket exhaust drowns it out its no louder that my twin plate clutch, Toms just being a tart

Pm sent mate john

If you com unstuck mate I can bore another tank out to 28mm for you send it to you then you send me that one back? sorry for the troubles I was unaware there were differences john

Hey mate Ive not really got the time this week as works gone mental paypal [email protected]

I guess haydn does'nt want it mate due to the bottle need to be relocating can you pay me by paypal?

No idea mate cant remember where the oem one locates to be honest as ive always used a custon one john

Bought this from a member a couple of weeks ago, not needed now as I have copyed it and made my own, it has a few scratches could do with a polish up. £30 posted

cANT SEE NO REASON WHY IT WONT MATE IM SURE I HAVE SOLD TO MEMBERS WITH UK CARS BEFORE IF IT DOES NOT I CAN REFUND YOU JOHN

Happy birthday Dave, have a JD for me

Mine was run using the oem fuel setup and ecu with no boost for 1000 miles then the fuel system & ecu upgraded and full mapping carried out

seems strange mate Ive not had any problems with them yet I take it its too tight? do you have a vernior to hand to measure the old bottle neck against the new one

Might be interested in either bonnet in a swap for a silver one and some cash