johnd-mkiv
-
Posts
2986 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by johnd-mkiv
-
No bollocks with me £75 for a pair have you fitted yours yet Jamie? being as i dont have a supra anymore I have no way of making a set to test out if you can lend me yours ill send them back with a matched pair free of charge. I can make these from ally, stainless or mild steel, painted or powder coated, polished chromed what ever takes your fancy but price will vary
-
I can do them for half that
-
I could do it for a lot cheaper dont want to tread on any toes though:hide:
-
as title please new or used john
-
go half hour either way an be done with it
-
Thats the one if you dont mind mate would be greatly appreciated Cheers Chris going to try a working one just to make sure first
-
having some misfire problems with my car at the moment have replaced the plugs an coil packs but still the same need to check the ignition amps not faulty john
-
Cheers Chris Or do i attach a fitting to the bottom of the tank with an 044 pump like JamieP suggested. All help much appreciated
-
Yer thats whats worried me about that set up, due to the roll cage design I cant seal the firewall. The tank in the BMW is a saddle type which might be my next problem
-
do you mean eliminating the swirl pot an using the fuel tank as one?
-
Had a read through CW's setup looks a bit much for my project, I have a walbro in tank pump at the moment can i use this as a feed to the swirl pot then a bosh 044 to feed the rail. from what i understand a feed from the walbro in tank pump to the middle of the swirl pot a take off from the bottom of the tank to the bosh 044 then to the rail an over flow/ breather top centre back to the tank a return fuel rail to middle of the pot or back in the tank? is this correct:help: in one of the links it gives a swirl pot design of 200mm high 100mm diameter, is this big enough?
-
Sorry forgot to put as Jamie said its my BMW project, ill scrap that idea then an try fabricate something else
-
When Ryan was mapping my car he said the intake was to close to the engine ideally needs to be located under the wing or boxed problem is things are in the way an whats left theres not much room the other day i was looking at it an due to the fan an rad being offset, I could make a shroud for the air filter to come off the back of the fan shroud so the fan draws air directly into the air filter my only problem then is its likely to be at rad temperatures. Can you see this being an improvement?
-
sold Polished cam covers + thermal Intake gasket
johnd-mkiv replied to RobSheffield's topic in Parts for Sale
Interested in the coil packs mate providing none of the stems have cracks or around the mounting screw lugs John -
I want to build a fuel systen with a swirl pot and larger fuel pump for my track car project, as the fuel seems to slosh about alot and i cant get a bosh 044 in the tank. Im running around 500bhp at the moment wont be more than 600 Not seen much on these or have much of an idea how they work an explanation, drawings an pictures would be great to help me along John
-
reminds me of my old one what a money pit that was
-
Still have a few of these left John
-
No worries mate ill tag along with the Skyline lot unless, we can get interest on here? long shot mate but dont suppose you know any one with a copy of the dvd that the tracks camera car used as part of a Marham video in september 07 i did ask at a few of the meets but never got any luck
-
I see on the skyline owners forum they will be running another track day in April, with the supra club be getting involved again?
-
sold TT Engine - longblock only - no turbos/inlet side, injectors ETC
johnd-mkiv replied to RobSheffield's topic in Parts for Sale
No worries mate -
sold TT Engine - longblock only - no turbos/inlet side, injectors ETC
johnd-mkiv replied to RobSheffield's topic in Parts for Sale
interested in the cams mate if you want to split I have some oem cams if you want to keep the block stock and do a deal -
Going to a masked ball in town, spent £26 on a mask thats going to last al of 5 mins I bet
-
group buy Uprated ally Radiator Expansion Tank
johnd-mkiv replied to johnd-mkiv's topic in Parts for Sale
I can do mate im guessing postage around £12 -
Hello glad your pleased with the tanks weskereric no idea on shipping at a guess from other stuff sent £12
-
Went a bit ott making these the weekend thought id sold more than I have I now have 1 unpolished and 3 polished ones left, doubt they will make it in time for xmas though. All the others have been sent out any problems give me a shout John
