rolli

how much are u looking for it

for 1993 N/A AUTO IMPORT. Mine has an ali. arm with a steel pulley

Mine is a steel pulley on a 93 n/a auto import. I will have to take apart and measure it up.

hi , ive got the same problem with my pulley needing a replacement bearing .Please could you let me have the details of the bearing cheers

hi , i need to find some cross drilled and slotted front discs for my n/a import as mine have warped. has anyone found any good deals:)?

Cheers guys i will try replacing it .where can i get one from?

Has anybody had the same problem? Hows the best way to bleed the system?. I have flushed the heater out and theres a good flow and the engine temp seams ok.

Used Stock Air Intake System For 93 N/a J-spec. Its Even Got A Brand New Filter In It. Must Go I Need The Space Or Ill Have To Bin It

no it came as part of a turbo kit i bought ,already had a bigger nicer stainless one

saw this filter for sale on ebay http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150090463322&ssPageName=ADME:B:EF:UK:11

I should be able to make it.See you all there

Have a look at my garage

Has anyone sucessfully fitted bonnet lifters?,if so what ones did you use and where did you get them from?

yes ihave checked all fuses and relays

I need some help!!! i have just fitted a new dash kit and oil pressure guage to my 93 jap N/A auto they all look great and are working ok, unfortunally i blew a fuse to the cig lighter when fitting replaced it and all seemed ok,until i came to start it. turn the key and nothing !! checked all the relays ,checked and charged the battery,starter motor ok.my cobra alarm seem to be locking ok light goes off to signal disarmed.but there is no current to the starter solonoid. looking at a prevoise thread the no.11 fuse also is connected to the original supra alarm system could this be where the fault is? Any ideas please as this is drivng me nuts!!!

hi guys, can someone tell or show me where the engine oil pressure sensor is located on my 1993 n/a the pic i have are not very clear as to the position there appears to be 2 close to each other is it the top one? i can the get on with fitting new oil guage. cheers

i would be interested - what sort of money are we looking at?

Could be a broken anti-rollbar mine was unstable until i found it was cracked by the mounting bracket. replaced it an all is well now also check all the bushes and shocks

camberley good for me

great .i have e-mailed you with my phone number

sorry guys finger prob should be 1993

hi, if Duffers dosent want them i would be interested my nearside one failed today

i need to source a nearside front brake caliper for my 1993 jap spec n/a.just failed mot. it appears that the casing has cracked has anyone got one ?needed urgently

i need a nearside front brake caliper - 1993 jap spec.just failed mot . needed urgently.

my light bulbs need upgrading. what would you suggest, i have japspec lights