mrdsukautos

Sold

Yes it is for 60mm gauges

pm'd

thanks guys but i only want to courier them not buy them anyone know of a good courier? i fell out with my courier so need a new one

I'll check gauge size when i get home i believe they are glued to glove box lid once you have prepped and cut holes in it for gauges

ok sold to this man pending payment

http://www.apexi-usa.com/product_electronics_detail.asp?id=199&pageNum=1 remember, this is coming WITH the G sensor so all the functions will be accessible. Comes with apexi instruction booklet £85 +p&p

as title says who is cheapest to deliver 2 tyres really busy today and just dont have time to shop around so any help greatly recieved

Bump Sorry for not being around for last month or so i replied to previous pms regarding this autobox

As it says in title here we have the glove box cover in CF to fit 3 gauges in I paid £90 for this but will sell for £80 inc shipping

This could also be a speedo chip issue i use same chips as Jurgen the NCS ones and if you fit a pro chip this can cause the same problem changing it out to a non pro ncs chip fixed problem

sorry to hear that Chris my deepest sympathies

check all the wires going to coil packs they may be old brittle and cracked and shorting out especially right at front of head where they go into main plastic loom

alarm or faulty stalks

no 99% of time i let her warm up and always do a run down also Gaz i been blowing up engines in cars for as long as i remember ^^ seemingly im real hard on a car lol thats 3 x 1jz and 1 x 2jz

lol thats the spirit guys nothing a bit of chewing gum and gaffa tape cant fix right

Dunno Rob i cant be arsed getting all covered in oil to find out tonight or even over the weekend i just simply dont care im gonna go get wasted at a mates and forget it all happened tonight lol

hey Rich long time no speak Yup its a natural talent i have having looked at it a lot since getting home it turns out the oil filter has been blown off all the threads are gone so something major went tits up inside engine ^^ yeh 99% of the time im guilty like we all are sometimes of just the quick 5 min to the shop thing i use my supe as a daily workhorse bud- toolboxes jack etc all in boot and off i go to fix a car just had it off the road for couple of months and missed it to much so was gonna have some fun while its not raining for once

so was a nice day sun shining thought stuff it ill put the supe on the road went for mot got failsheet just needed 2 tyres and reconnect fog light up again sweet i thought thats easy ill be back in an hour and itll be ready for retest taking car to workshop to sort it all out i decide to have a blast on the bypass just to remind me how much frun the old girl is to drive boot it past a little saxo keep booting it then BOOM............. oil everywhere stop had a look finally see oil filter lying on subframe ^^ god knows how that came off ? put it back on go get oil start up and she sounds sweet then pull away taking it easy and the bottom end gets noisier and noisier pull over literally 200 yards up the road and oil is pouring out the engine all over the road so i presume i put a rod thru side of block And to think i bought a supra after blowing 3 1jz engines in my soarer thinking it was gonna be a lot stronger engine ^^ car had only done 44k miles on import was never boosted etc totally stock except wheels and shocks serviced overmuch only run some 3k miles with it at .9 bar ^^ Ah well i suppose i will jsut have to find a block and go down the route of building an engine this time and if i blow a built engine im out the tuning my car game im just sick of ripping engines out and putting em in again

I believe the valve body has also been modified for quicker changes similar to the MV autos modified valve bodies

you can get a freeview card for your sky box just make sure the dish is perfectly level in all directions so you get a good signal old oil drum filled with concrete does the trick nicely to keep your pole firm and stable

its not just the torque convertor i also have the built drag box with a torque convertor thrown in with it so you have a choice 3800 torque convertor - £300 delivered built drag box plus 3800 torque convertor - £1500 plus pallet delivery cost( probs around £60-70)

bumpety bump

also the hoses connecting cam cover have a tendency to be very brittle / hard and cracked for only a couple of pounds you can order new ones from Mr T