steve spedd

No mate still sat in the garage here...

Hi! No photos as it’s at the unit but have the following available for a R154 conversion with the following: • R154 Gearbox (was in working order when removed) • Used 2JZ Bell Housing (OEM Toyota), it is missing the dust cover to the access hole, but these can be bought new still. • 1JZ Flywheel (I think! required to bolt the clutch and R154 to the 2JZ) • 3+ Spec Clutch (used for about 500 miles) • Mk3 Supra Propshaft (The front half of this bolts to the original rear half of the Mk4 propshaft) • OEM Toyota Gearbox Mount with brand new Drift Motion mounting kit (required to achieve the correct angle on the propshaft) • Lengthened shifter housing to suit the Mk4 Supra transmission tunnel • New Cube Speed shifter bushings • OEM Toyota shift lever • Clutch Master Cylinder • Clutch Pedal Assembly • Manual Brake Pedal Assembly • Hard line from the clutch master cylinder to the slave cylinder Parts needed: • Flywheel bolts •Slave Cylinder • Gearbox oil as Said I have a flywheel but need to check if it’s W58 or 1JZ after £2,500 for the lot… located chesterfield, Derbyshire thanks steve

Hi, Im after a Twin Turbo Auto Prop-shaft if anyone has one available please let me know. thanks!

I've got an R154 and all the associated parts if you are interested.... .

Sorry to bump an old thread but I'm just wondering what a rolling shell would fetch in today's market? I have a TT6 (black) rolling shell with a welded in roll cage which is currently sat in primer, windows out apart from the front but would be supplied... Any ideas at all? thanks...

I've got a 2JZ (Ge) Bottom end available PM me if you are interested

Afternoon All, Pics below, average condition £150 collected from Chesterfield S43 Same as this: https://www.upgrademotoring.com/performance/tanabe/supermed_exh.htm Thanks, Steve

Afternoon All, Pics below, average condition £150 collected from Chesterfield S43 Thanks, Steve

For Sale again, revised price...

BACK AVAILABLE... £2,950.00 R154 Full conversion kit – Mkiv Supra 2JZ JZA80 Due to personal circumstances this lot is up for sale (going auto): · Mkiii Supra R154 box (good condition with no issues) · 1JZ/2JZ Genuine Bellhousing (RRP: $399 https://www.driftmotion.com/1JZ-2JZ-R154-Bell-Housing-p/dm3.htm) · 2No. cover plated for Bellhousing · Mkiv supra rear gearbox mount · New (never fitted) Mkiv Driftmotion R154/Mkiv rear gearbox mount (New RRP: $129.99: https://www.driftmotion.com/R154-Swap-Mount-Kit-MK4-SC-GS-p/dm2643.htm) · 1JZ Flywheel (suggest this is skimmed prior to use) · ARP Flywheel bolts · Shifter extended to suit MKiv transmission tunnel · Cube short shifter to suit the above · R154 Clutch fork and new pin (pin not shown in the photos) · Used Clutch slave cylinder · Propshaft (mates from R154 to Mkiv small diff) · Clutch master cylinder (used) · Clutch pedal and assembly (not shown in the photos) · Spec Clutch (Stage 3+) done about 1500 miles (RRP £735.70: https://www.garagewhifbitz.co.uk/spec-clutch-1590.html) · Xtreme Clutch (Stage 2) done about 20 miles (RRP: £538.80: https://www.driftworks.com/xtreme-clutch-for-toyota-supra.html) Other than the pipe from the clutch master cylinder to the clutch slave cylinder and a few bolts this is everything you will need to put the R154 into a Mkiv Supra… I’m after £3,250.00 £2,950.00 Collected from Chesterfield. Please take a good look at the photos and message me if you have any questions. I have this for sale else where so if it sell's then i'll remove this... Thanks, Steve

Thanks David...

Having said that I've seen the PHR Solid ones. These any good?

Ok so I've had a look (with my eye David! ) And I'm pretty sure it's the engine mounts. Where is best to get some (I don't want solid)... Thanks in advanced

Can i please take these: Front & rear Toyota Logo's plus Supra Badge - £55 PM on way

It's a paddle clutch but did it before I changed that. I've ruled out the clutch and flywheel and once you've set of its fine. As usual you might be right Sir! I think it's one of these. Any way to test them? Visual inspection won't give me anything will it? Thanks for the reply. I do think it's leaning towards this. Anyone know where I can get a 1 piece prop for the R154 made? Would eliminate some issues!