randy

Very nice mate!! Enjoy the power you have for the next week cause you will want more soon!!:D

Only thing I carry is a fire extinguisher! Is a Roll cage a must if you were running high 10's??

All the best to you!! Im glad some of the U.K guys are getting into the high performance stakes!! Pls stop listening to the naysayers about every single detail..... each one seems to have their own opinion on what is possible or not..... I would suggest you focus on your project than listen to what times or HP is possible from people who have not yet achieved it!! People in the U.S have achieved fantastic times and numbers....apart from the track. Someone has to set a standard !!

Thanks! Got my resistor pack wired in nicely.... Was a pain to find the right wires that go to the injectors!!

Trying to wire up my resistor pack and found black with orange wires which go to the injectors on the wiring loom and there were 9 such wires. Now there seems to be continuity to all the injectors from the wires? To isolate the 6 injector wires...... I have to dis-connect the IJ1 multiplug connector... Now where is this IJ1 connector located?

wow!! They look the nuts!!!

According to what I have read you would need to re-allign your car any time you change the height of your set-up. So even if you have height adjustable coilovers and you decide to lower or increase the height it is necessary to adjust the toe and camber. The HKS are supposedly a great unit!! Im sure your going to enjoy them!!

Ouuuu... Don't ask Don't tell!! :D All I can say is I cant afford to pay 62% FOB on my shipments...

Ahh..... we have the chariman of Boostlogic here! Hi kean! Im glad you joined the U.K board!! We need to motivate the U.K boys to go single instead of going the hybrid route. Hopefully with your input they would be more convinced. Will get some good photos taken soon and post them!

Fitted the manifold and turbo today along with the 4" dp/mp absolutely no clearance issues fits real clean!! No where near the steering column too!!

Terry your right the 4" dp/mp has been made with a V-band and is a direct fit on a HKS ti. Don't think it would be possible to use an adaptor as the length of the midpipe would be too long....

Thanks terry! that is re-assuring.......Do you know how I should remove fuel at idle if it were to run rich? Do I use the low throttle setting? It would be nice to finally see my air-fuel ratios in real time with the FJO. http://www.showoffyourcar.com/cars/2938.JPG http://www.showoffyourcar.com/cars/2939.JPG Bikes on southbeach - miami! I think they are called american chopper. http://www.showoffyourcar.com/cars/2940.JPG http://www.showoffyourcar.com/cars/2941.JPG My next car! http://www.showoffyourcar.com/cars/2942.JPG

I was told to stick with the stock computer with S-AFC till such time I could get justin down to Bangalore for the AEM as I would have a problem getting it to run properely. Hopefully should have em here sometime in July. Justin/kean are great guys justin is one of the best AEM tuners......Ahhhh... they bought me a couple of lap dances too !!hehehe:D The only issue I might have is the idle which will be pig rich with the 780cc injectors so I would need to remove a lot of fuel! Hope the S-AFC can do that? Would I need to use the low throttle settings?

Hi guys! Been busy with work and also been popping in to see the progress of my car. Getting the pea-shooters out was a PITA! Car should be done in by the end of next week!! Boostlogic kit is definately one of the best kits for value and quality! I personally flew all the way to the U.S- Austin tx met kean and Chris (the pro mechanic)! They have a great setup and are doing fantastically well! Spent 3 days hanging out at the shop, saw about 10 supras at the shop all waiting to get work done. Chris - the pro mechanic took me for a spin in a 850hp supra which was..........insane!! I froze with fright!!got sucked into the seat asking for him to slow down, car was all over the place and the sound was terrifing. I am really lucky to have the first 4"dp/mp from boostlogic as they had only a proto-type that had to be sent for production but kean took time out to personally make another one just for me. I will let you guys know how it all goes with regard to the 4"dp/mp fit soon!

Started my install of these goodies!! Boost logic turbo kit with 4" midpipe/ downpipe. BL 67 turbo with anti-surge shroud / fuel kit - meth kit -- FJO-WBO2, Gauges-EGT-Fuel P- HKS tri clutch install kit- resistor pack- Titan line lock- B&M short shifter-2 HKS SSQV's. etc... http://www.showoffyourcar.com/cars/2920.JPG http://www.showoffyourcar.com/cars/2919.JPG http://www.showoffyourcar.com/cars/2923.JPG