Greystoke
-
Posts
107 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Greystoke
-
Thank you.
-
The drive belt tensioner is lining up where the red mark is in the picture. Does this mean the belt needs to be replaced or the tensioner is at fault. http://itvault.com/supra/ten.JPG
-
I am getting a screeching sound like the belt is slipping. Thought that might have been causing it. No it’s not the engine in the pic.
-
Hi, The pully in the pic is not turning. I take it is the Air con pully. What could be causing it not to turn, while the engine is running. http://itvault.com/supra/DSC00406.JPG
-
-
-
Thank you. Please let me know when it's up for sale.
-
Does anyone have a used/second hand, TRL DSC+TSD for sale.
-
Has anyone tried using a USB -> Com cable to connect to the RLTC ECU. When I go into the Options menu -> Com ports on RLTC software the port is in use. I have tried selecting Virtual ports and then selecting the port, but it doesnt connect to the RLTC.
-
Thanks for info. I will leave it on. It will save taking things off if I need to reconnect it.
-
Can the RLTC Diagnostic Cable be left connected to the RLTC ECU after calibration, or does it need to be removed for the unit to work correctly.
-
Boost guage fitting help. Need to double check which pipe to cut :)
Greystoke replied to MarkTheBoy's topic in mkiv Technical
try here http://www.mkivsupra.net/vbb/showthread.php?t=68651 -
The radio reception is very weak. Most stations wont tune in and those that do are all noise. I have checked that the aerial is plugged into the stereo. Also the aerial does go up. Is it possible for the cable to come out at the motor end. Anyone got any ideas what could be causing this.
-
Thanks for the info.
-
What are the 2 boxes above the stereo.
-
Thank you.
-
Is it the THROTTLE CONTROL ECU that has to be removed.
-
Thanks, just wanted to make sure before I took them off. Does it matter what order the injector cut on the RLTC is wired to the harness. Thanks.
-
I bought this with the RLTC already wired to the Field Harness. This had never been plugged in. This is to be connected to a 96 Facelift non vvti. Looking at the wiring, it looks wired the wrong way for the injector cuts. Shouldn't these wires be at the topside of the block where I have marked in RED. http://www.itvault.com/supra/rltc1.jpg
-
1 - Chipmunk 2 - gaz6148 3 - mr lover 4 - Feakins 5 - Dave 6 - Jamesmark 7 - jim_supra 8 - Psymon 9 - Bob 10 - aeropete 11 - Faye 12 - DaveM 13 - Supra-man 14 - RobSheffield 15 - Voo51 16 - GazzaGSi 17 - Jim_1979 18 - suprarob 19- Gaijin 20-Mas 21-Greystoke
-
Where have you put your RLTC launch control unit?
-
Thanks for the info.
-
Not sure what size my 2nd decat pipe is, if it is 2.5" or 3". Going to buy a 1st decat pipe. Does it matter what size the 1st decat pipe is. Will a 2.5" & 3" pipe fit onto the 2nd decat.
-
It has only started doing this in the last 2 days. The car would be started around 8am so the coolant wouldnt be warm.
-
The Choke is not coming on when the car is cold. Revs stay at about 600 Is there a sensor or something I can check.
