ManwithSupra

I would like to resurrect this thread as i am after one too but cant find one. Metal version of the Stock Pipe.

Need one for a Jspec (if they are different) Money waiting

I have the replacment gaskets already (cheers whifbitz) i just wanted to know if its as straight forward as removing the old ones and putting the new ones on? Or do i need to muck about with sealant too? If so can someone enlighten me on which sealant to use and applicaton too. Cheers

I have played the Demo of this recently. I got sent a Key from Playstation store to download it. I have to say the demo is amazing, pretty intense and the graphics are pretty impressive although due to better graphics its quite a bit more gory then the previous two lol

Dont forget to lock up your Supes, or put them where you can see them. I said this last year and unfortunately some people got their cars damaged etc.... You’re bound to get drunks out to have a good time smashing things to bits. I would dread anyone have their supe spoiled in some way even if it is an egg which has been thrown at it (dried egg can mean a respray) Look after those supes and make sure they are either tucked up in the garage or on your drive way where you can see it. Shame we live in world where there is a night where it’s a good excuse for a few people to act like mongs

Yeah probably, just need one with the lip still attached.

76857-14030 £35.05 76859-14010 £65.68 76858-14030 £35.05 76853-14020 £29.99 76854-14020 £29.99 76861-14040 £55.11 90179-06143 £0.75 EACH x 11 £259.12 then delivery....

You guys are so nasty taking the mick..... dont you know the guy selling it is blind

Had a shock when i spoke to toyota with regards pricing of these bits!! Does anyone have any lying about (the ones in red boxes in the above picture)

Will phone you in a few mins

Now on Ebay - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=280416957774

Hi All, NOW ON EBAY http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=280416957774 I have had this for about 1 week and used it probably 3 times in that time, i am only getting rid of it as i have too many computers as it is (Two laptops and a kick ass Pc) This is the American Version, so the Keyboard has the "@" symbol where the "quotation" symbol should be and Vice Versa. Here is the Spec of the unit. Windows XP Service Pack 3 - With the most current updates HP Mini 110-1030NR Intel Atom N270 1.6 GHz Processor 512 KB L2 Cache, 533 MHz Front Bus speed 1024 MB DDR2 RAM 160 GB (5400 RPM) SATA Hard Drive 10.1" diagonal (1024 x 576) LED Anti-Glare Display HP Webcam and Microphone Intel Graphics Media Accelerator 950 with up to 128MB Shared Video Memory 802.11 b/g Wireless LAN 10/100 Base-T Ethernet LAN 5-in-1 Bridge Media Adapter: MMC, SD, MS, MS Pro, xD Ports: 3 x USB 2.0, Headphone out/Microphone-in combo Jack, VGA, RJ-45 Approximate Unit Dimensions: 10.3" (L) x 6.77" (W) x 1.04" ~ 1.29" (H) Approximate Unit Weight: 2.89 Pounds It comes fully boxed with, Manuals, documents, UK Power Cable and Adapter. These Netbooks do not come with a Recovery disc as standard. Here is the offical "hero" shot And my best efforts

I need both of the rocker cover gaskets please

I have my Supra (£680 a year), and MK2 Ford focus TDCI (Around £400 a year) and my missus has a MR2 Turbo (£400 a year).

There are ones thats go to 220mph although i would not know where to get one, as far as i know it just continues around the clock where the 180 finishes. However is there any point?

Haha, good luck dude I love the build quality - Is that cable ties holding the door on?

Cheers dude

I need the part numbers for the bits with red boxes around also i need to have the part numbers of the nuts too?? I have looked on the EPC and can find the details for the front bumper but the lip part does not seem to be listed. I got the below image of the repair manual but it does not list the part numbers.

One didnt sell on ebay so 1 have the one unopened one still for sale if anyone is intrested. £150 delivered

Yeah fine for a passanger ride mate, the only thing is i live near southampton

With the combination of the Titan ARB kit and the R2 bush kit, It is harsher than stock but i found its not "painful" but then you do notice it (put it this way i have driven cars with a even harder ride) IMO i feel it does not make you loose confidence round the bends or going over bumps, i feel it actually rides the bumps very well when going at speed. But if my supe were to be a daily driver then the harder ride would probably get a little tiresome over time. The R2 bushes that i had installed made the car feel so much more agile and controlled, again it made the ride a little harsher and the road noise is a little louder, IMO i wouldnt say there is a huge difference between the stock ones and the uprated R2 bushes. The combination of the Suspension the ARB kit and the bushes i honestly feel it is leaps and bounds better in terms of turn in, confidence and actual handling ability, however looking at how shot my older components were then it would be hard to compare how good it is now against new stock parts. What we need really is a "Stig" like person to take a totally Stock Suspension Supra (with new components) and a Setup like mine around a track and actually see what the difference is in handling and track time. If such a person can be found as well as "stock" car i would be happy for someone to take mine around a track to do this comparison

I am taking it out on the m3 later so i will see if mine tramlines too.

Fitted the rest of my suspension upgrade this weekend, and its transformed the car This weekend i fitted the Titan Adjustable ARB kit and new Droplinks on the front and back, set the ARB's fully stiff at the front and fully soft at the rear, now it feels so new and solid, does not roll and the steering feels so much more responsive, the turn in is so much better, it feels like a brand new car in case i was just "thinking" it i got my mate to drive it and give his verdict too (he had had driven it before all the work was done) and he was really impressed at the difference in handling and steering response which i thought was nice considering he has a M3 CSL. So this completes my suspension project here is what has been done... Tein Superstreet Adjustable coilovers R2 Racing Front and Rear suspension bush kit (fitted by miko supra) Titan Motorsports Adjustable ARB Front and rear kit. New OEM Droplinks and hardware (nuts and bolts) Now onto the braking system.....

Im am getting one Great for track days too

I am fitting this today but i have a quick question, My kit came with two metal spacing plates - now i assume these are spacers to fit on the new bush fixings but which ones are these metal plates for... the front or rear ARB? Just that i dont like to start a job without knowing exactly what goes where etc (i always read up so i know what to expect) but this time i cant find really anything giving information on this, got no instructions with the kit you see. Also i assume that the grease supplied goes on the outside and the inside of the new rubber bushes? Cheers everyone