Mike M

Hi all, Girlfriends 03 plate yaris T sport is giving a P1349 code and has been hesitating in the higher revs. Been told it could be valve timing, VVTI controller or a solenoid within the VVTI controller that can stick. I've already checked the OCV and filter. Anyone know how much a VVTI controller is roughly from MR T?, just weighing up the worst case here as its gonna be a long job. Thanks Mike

Was following you out of Blairgowrie to Alyth last Saturday. Nice shiny white Supra with the table top Veilside rear spoiler thingy.

Wheel bearing now sold too.

LOL, you have a PM. Cheers Mike

How about meeting me almost half way with the postage and say £155 all in

Skirts now sold

I'd rather keep all the parts together as a kit mate as I think trying to sell the other bits and pieces will be more difficult otherwise.

They might not be if all goes well, certainly generated a good bit of interest but one person got in there first.

Just trying to add it up because i've had it sitting for so long now, the bearing alone is about 90 from Paul whiffen, hub flange i'm guessing is over 100. Seals and clips are probably about 40 - 50 quid. They're all genuine Toyota parts.

Hi folks, I'm trying to clear space in the garage and fed up with these sideskirts getting in the road plus they'd look a hell of a lot better bolted to a Supra again:) These are genuine Toyota OEM skirts that I 'd taken off my last Supra and are in 3L2 red. Overall condition I'd say 8/10. Now Sold Looking for £250 ono and unfortunately Pick-up only due to the size. I live in Perthshire Scotland so bear this in mind. If your fairly local i.e Glasgow / Edinburgh / Aberdeen I can throw them in the car and meet you half way. The other parts I would like to get rid of is a complete rear hub bearing kit and flange bought for the TT 6sp but will fit any model. Looking for £150 ono + £12 postage for 1st class recorded. This is everything you need for a rear hub bearing change, hub,bearing, seals, clips, nut etc. Now Sold. If your interested you can either reply to this post or PM me or contact me by e-mail on:- [email protected] Thanks Mike Thanks for looking

Three cans of aerosol carpet dye should do the trick, bought mine from some valeting firm after googling it. I got away with two but I went for the dark grey rather than black. Found the place, http://www.carchem.co.uk/ Cheers Mike

Nope, two hammers. Hold one behind the hub flange and give the stud a good whack with the other and it should come out no probs. You might need a willing assistant to hold a drift of some sort if the stud is snapped flush with the hub. Use the wheel nut to pull the new stud through. 5 min job. apart from removing the wheel, caliper, disc etc lol.

Thanks Chris.

I reckon the best I've seen was 22.5k for a pre reg 09 plate in grey but it was an auto. I spoke to Peter Vardy the dealer in kircaldy who was selling new ones for 24k and they sold very quickly mostly to folk down south. They have two more coming but they are red and auto.

Hi all, Just a quick one, will a TT 6sp rear wheel bearing and hub fit all the supra models or are there differences. Cheers Mike