StuartW

up top for a great manifold new these cost over £2400 to get into the country. Sensible offers considered as it is now surplus to requirements :-)

bump

had some enquiries on this and it really is good enough to just bolt straight onto a black supra, or if you wanted a black spoiler. The shine is brilliant. there are a few VERY MINOR stone chips that could easily be touched in but they are so tiny they are hard to see even though the colour underneath is white!

bump

Here's a pic..

I now run a Full race T6 manifold that i had to convert from twin 40mm wastegates to single 60mm. It flows better for me at over 1500hp 8750rpm's and 2.4 bar of boost! Will get some pics together asap...

[/-]Hi I have for grabs my exhaust manifold as used for 1 drag season and purchased from Leon green's 7.2 second supra I have used a T6 framed GT47/88 turbo with this. has 6x egt bungs/threads welded into each runner which can be blanked off if not used. used a single wastegate, i used a hks 60mm but the cheapo 60mm gates from demon motorsport (Ebay) also fit the pre welded on flange. http://www.ebay.co.uk/itm/60mm-EXTERNAL-V-BAND-WASTEGATE-CUSTOM-13-9-psi-0-96-Bar-Red-/370406177516?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item563dedbaec [-]£900 price dropped to £700 can put pics up if interest..

Bump

Black stock rear spoiler available, Pretty good nick £60 Will package in cardboard/bubble wrap if buyer arranges own collection please Stu

Hi Just about to replace my ARP 2000 Studs/Nuts with L19 and they have turned up un packaged as in not in an ARP box, With ARP moly lube and no instructions. ARP website has a search for torques kit part number, The ARP 2000 and L19 states the same 80ft pounds...This does not seem right especially as they are both listed as 2000psi tensile strength where the ARP2000's are 190,000 and L19 listed as "L19 is a proprietary material capable of achieving strengths of 220,000/230,000 or 260,000/270,000 psi as may be required. Both L19 and ARP2000 steels are modified bcc (martensite) at room temperature. L19 has the same advantage as ARP2000 in that a high strength is obtained at a high tempering temperature. This alloy is easily contaminated and requires special handling." so now i am confused.com!! Any help appreciated as i need to get this thing re assembled tonight for the Euro's Cheers Stu

Probably the best thing that happened for us all weekend lol ;-)

Hackin YHPM

bumpsky

still available...quite suprised! OVNO now ;-)

but would like to confirm something :-)

first post updated..

still after a bonnet in black please..

Nice one probrox :-) Text or PM me ya number so i can remind you nearer the time, really appreciate it as this is all a temporary tidy until next season when i can afford a full respray on the new shell. Besides orange and silver just doesn't look right ;-) Cheers Stuart 07788774991

yeah that's fine, over to PM

It was from a J spec, 1993 model. Milometer says 68,000 not sure if it was K's or miles but i suspect K's. it is the typical J spec import spent most of its life in japan doing very little. From my experience of these things electrolosis (Usage) and poor servicing/wrong coolant causes alu cores to rust/corrode. As you can see from the pics internally it has a tarnish but no corrosion or build up. Up to you really i suspect they are lots and lots from Mr T..

yes, hows about £50 delivered..

Have removed and pressure tested to 15 psi ;-) Pics

sounds good, i can wait and use the scratched one til then, do you want to pm me a price please? Stu

bump..