ADD
-
Posts
1779 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by ADD
-
Ahhhhhhh I see that helped loads! All completed now. Although I have measure everything exactly the same when installing the suspension but the height on one side is more than the other!! I'm not worrying too much as it's got to settle first Ad
-
I wouldn't have been able to lever the hub down to get suspension out if I hadn't of disconnected the drop link. Is there easier way then?
-
Oh ok mate I took the bottom bolt out and the drop link off along with the 3 top nuts but didn't see the long suspension arm bolt. Coz as I pull the whole unit down to take it out it gets jammed on the rear part of the spring.
-
Replaced and set up the rears in a couple of hours today, couldn't believe how easy it actually was (cheers perry) got to the fronts and I couldn't shift the suspension enough to get it out, realised that I'd need spring compressors to compress them by 2-3 cm and it would clear. So back in it tomo.... Enjoyable day doing it though. Ad
-
They're 18's bud you can have them for 200 + delivery
-
This is good news
-
Thats exactly how i can see the only way of doing it.....
-
Hi mate think I may need to take you up on that offer. Any chance I could grab ya number of ya don't mind? Ad
-
The suspension is brand new matey, I just can't see how you can alter ride height when the bottom of the suspension is bolted to the car.
-
To do this perry i'll have to undo the the suspension from hub assembly wont i?
-
Thanks for that info matey, that's a real pain in the ars!! But oh well have to put some normal tyres on now then
-
You absolutely right mate!!!! Just annoys me that toyo days they are road legal!!
-
I will when I try next mate but had to take the supra there so it was hard to say that it wouldn't be driven on the road... He questioned the size too. 275 on a 9.5j fits fine but it's the max they recommend you to that wheel size.
-
The first garage wouldn't do it but the second one said they would but then cane back with this crap....
-
Went to get some toyo ra-1 fitted to the car today and he wouldn't fit them as apparently they don't have an 'E' number but do have a DOT number!! And aren't legal for road use!! BUT it says on toyo site they are street legal! Can anyone shed any light on this? Thanks Ad
-
Jonny I have a nur spec cat back for sale in the for sale section. Ad
-
ok mate i might aswell have a go at it myself.... thanks for your help
-
Thanks for reply pal, if its that simple then yes ill do it myself i think. where abouts it WIM? cheers ad
-
Hi all I have got my Meister r suspension through now (massive thanks to Dr_jekyll) and have a local reliable garage to fit it for me and put an MOT on too, but as far as im aware the ride height will be pretty high as standard so ill need to find somewhere local to hampshire that can alter the height of the suspension for me! Does anyone have any ideas where i can go? Ad
-
Check the 2 small wires going into coil pack clips as I had the same prob and it turned out to be 2 of those on cylinders 2 and 6 were burnt out due to the bend thats put on them (black scorch/overheating colour)
-
Bump
-
Here are pictures of the exhaust. I have taken allot so the damage is visual on mid section and back box http://tapatalk.com/mu/528488dd-13ee-084c.jpg http://tapatalk.com/mu/5284f837-1433-f3a7.jpg http://tapatalk.com/mu/52848b97-1469-a055.jpg http://tapatalk.com/mu/528488dd-148f-96d0.jpg http://tapatalk.com/mu/5284f838-14b4-4993.jpg http://tapatalk.com/mu/5284f838-14dd-b6ab.jpg
-
The exhaust is a cat back, I shall get some pics up of it today or tomo.... Cheers
-
Ummm it's the catback and just the back box matey
-
This is up for sale off of my TT, it has a few minor scraps on the bottom and a little tar damage but other than that it's in good condition £275 + postage to UK ONLY
