Jump to content
The mkiv Supra Owners Club

ADD

Followers
  • Posts

    1779
  • Joined

Everything posted by ADD

  1. ADD

    Re-map next fri

    very true mate, but when Ryan said it wasnt running well at all and a stock could produce that power i wasnt so happy.
  2. ADD

    Re-map next fri

    Thats very true mate bit of a pain but i'll get it looked at and hope we can improve on the power.
  3. ADD

    Re-map next fri

    No, there was a small cost but nothing substantial
  4. ADD

    Re-map next fri

    Well took a drive up to SRR this morning and met Ryan and charlie, two top blokes so firstly a massive thank you to them.... I Explained to Ryan that i thought the car was rather sluggish, so he said he'll do a power run and see what it kicking out and check the map to see if it can be tweaked. Well it didnt go very well TBH, the first turbo is doing practically nothing so the car only peaked @374bhp and didnt even manage to reach 300 Lb ft of torque this was at about 1.3bar. He took 5 degrees off the timing as it was deting badly too. I have the graph at home so will post up for some thoughts, but he has told me i need to get the sequential system looked at and a compression test done. I knew the car was pretty flat on power so glad i went to see him.
  5. ADD

    Re-map next fri

    Should I change the plugs again after mapping or will the ones in there be ok for after?
  6. ADD

    Re-map next fri

    Really? that would be even better but it is an auto so think i lose a little there straight away.
  7. ADD

    Re-map next fri

    Looking forward to next fri, as going up to SRR with Ryan to tweak the car slightly, it will be nice to finally see what its putting out. I'd be over the moon with 350 tbh. Bought some BKR8EIX to go in before so he can work his magic. Ill post up graph etc when i get it. cheers
  8. could this be fitted to a TT?
  9. fantastic results and an awesome car too. Does Ryan map piggy back ecu's?
  10. These look fantastic on a black or white soop, i have some on mine. Trust me!
  11. Awesome mate, sounds like fun! Id love to be able to build something like that but i cant even replace the tail gate on my soop without it taking 3 hours
  12. What ya building her? The aerotop is that ya black one?
  13. Cheers mate, has it got problems then?
  14. You drove up mount pleasant in alton at about 1920 ish, hade black wheeks and sounds GOOD. My supra was parked on the road. Anyone on here?
  15. Hello mate, that would be me i remember seeing a black one down your way a while ago and thought as i was at my mates (just round the corner) i would go past and see if it was still there. What are your plans with the red one?? I saw a young lad come out and a fella smoking, whether that was u or not im not sure.
  16. ADD

    replacing boot

    Thank you so much thats great help!!! you'll rewarded in heaven my son
  17. ADD

    replacing boot

    Cheers dude, thought that would be the tricky bit. How long do ya wreckon it would take?
  18. ADD

    replacing boot

    I should have put tail gate really oops
  19. Morning all, how hard is it to replace the tail gate? Is there a certain/best method etc? Any help would be magic. Thanks Ad
  20. Does anyone have one of these for sale? needed asap
  21. guys thank you so much for ya help!!!
  22. Hi all, for the last month or so the drivers window has been making a horrible grinding noise when going down and coming up, but would never go any lower than half way. Finally today it has given in, the window wont go up at all and i noticed when i took the card off that a copper wire has snapped. The window has fallen right down and can be pulled up but hits the blue stops half way. do i just need to replace this wire or will the motor need doing too? the wire has come out of the pulley completely too. Any help would be great.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.